Phoenix
Sort By:
Default
Name (A - Z)
Name (Z - A)
Price (Low > High)
Price (High > Low)
Model (A - Z)
Model (Z - A)
Rail adapters, for M3 screws, Length: 10 mm, Width: 42.6 mm, Height: 19 mm, Color: black..
Ex Tax: € 0.31
G-profile DIN rail, material: Steel, perforated, height 15 mm, width 32 mm, length 2 m..
Ex Tax: € 9.65
G-profile DIN rail, material: Steel, unperforated, height 15 mm, width 32 mm, length 2 m..
Ex Tax: € 8.93
G rail 32 mm (NS 32)..
Ex Tax: € 19.72
End clamp, width: 8 mm..
Ex Tax: € 0.42
Flat bracket, with M6 screw, for fixing DIN rails 12 mm above the mounting surface..
Ex Tax: € 0.99
Angled brackets with M 6 screw, for fixing DIN rails at an angle of 30°, height: 35.4 mm..
Ex Tax: € 0.99
Angled brackets with M6 screw, for fixing DIN rails at an angle of 30°, height: 46 mm..
Ex Tax: € 0.99
Flat bracket, for fixing DIN rails 15 mm above the mounting surface, the fixing hole has a diameter ..
Ex Tax: € 0.52
Support bracket, for insulated mounting of DIN rails in insulated systems, plastic, 21 mm high..
Ex Tax: € 0.74
G-profile DIN rail, deep-drawn, material: Copper, unperforated, height 15 mm, width 32 mm, length 2 ..
Ex Tax: € 114.70
G-profile DIN rail, material: Steel, unperforated, height 15 mm, width 32 mm, length 2 m..
Ex Tax: € 14.64
G-profile DIN rail, material: Copper, unperforated, height 15 mm, width 32 mm, length 2 m..
Ex Tax: € 42.47
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, c..
Ex Tax: € 0.39
End clamp, Width: 9.5 mm, Height: 35.3 mm, Length: 50.5 mm, Color: gray..
Ex Tax: € 0.22
End clamp, width: 8.5 mm, color: gray..
Ex Tax: € 0.36
Adjustable cover holder, for mounting covers (up to 3 mm thick) on terminal blocks, can be used for ..
Ex Tax: € 0.76
Rail adapter, snaps into NS 32 DIN rail, plastic with embedded M4 and M6 nuts, for attaching switchg..
Ex Tax: € 1.00
Double hinged carrier, for mounting two NS 35/7.5 DIN rails above each other. If the top DIN rail is..
Ex Tax: € 15.77
Rail adapters, for M3 screws, Length: 42.6 mm, Width: 10 mm, Height: 19 mm, Color: gray..
Ex Tax: € 0.25
Angled brackets with M6 screw, DIN rail limit stop, for fixing DIN rails at an angle of 30°, height:..
Ex Tax: € 0.99
Angled brackets with M6 screw, DIN rail limit stop, for fixing DIN rails at an angle of 30°, with M6..
Ex Tax: € 0.99
End clamp, for end support of UKH 50 - UKH 240, is pushed onto DIN rail NS 32 and fixed with 2 screw..
Ex Tax: € 1.60
End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 scre..
Ex Tax: € 1.53
End clamp, for end support of terminal blocks, for mounting on NS 32 or NS 35/7.5 DIN rails, materia..
Ex Tax: € 2.54
DIN rail 35 mm (NS 35)..
Ex Tax: € 14.22
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m..
Ex Tax: € 6.33
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, wi..
Ex Tax: € 3.99
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, wi..
Ex Tax: € 11.67
Slide nut, for DIN rail NS 35/15-AL, with M4 thread, for mounting equipment, material: Steel..
Ex Tax: € 0.49
Slide nut, for DIN rail NS 35/15-AL, with M5 thread, for mounting equipment, material: Steel..
Ex Tax: € 0.66
Slide nut, for DIN rail NS 35/15-AL, with M 6 thread, for mounting equipment, material: Steel..
Ex Tax: € 0.66
DIN rail, unperforated, Width: 35 mm, Height: 15 mm, Length: 2000 mm, Color: silver..
Ex Tax: € 11.77
Crimping pliers, for ferrules in accordance with DIN 46228-1: 1992-08 and DIN 46228-4: 1990-09..
Ex Tax: € 77.93
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m..
Ex Tax: € 32.85
Assortment box, metal, supplied with ferrules acc. to DIN 46228-4: 1990-09, 500 pcs. each of AI 0,25..
Ex Tax: € 330.08
Screwdriver range, consisting of the small screwdrivers: SZS 0,4 x 2.5, SZS 0.6 x 2.5, SZS 0.6 x 3.5..
Ex Tax: € 29.85
Screwdriver range, consisting of the three small screwdrivers: SZS 1.0 x 4.0, SZS 1.0 x 6.5, SZG 0.9..
Ex Tax: € 40.82
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, c..
Ex Tax: € 0.40
Assortment box, metal, supplied with ferrules acc. to DIN 46228-4, 300 pcs. AI 10-12 RD, 200 pcs. AI..
Ex Tax: € 315.36
Stamping bit, for elongated holes: 6.5 x 15 mm..
Ex Tax: € 104.69
Stamping bit, for elongated holes: 5.5 x 12 mm..
Ex Tax: € 130.27
Stamping bit, for bore holes: 4.3 mm diameter..
Ex Tax: € 93.19
Stamping bit, for bore holes: 5.3 mm diameter..
Ex Tax: € 83.22
Stamping bit, for bore holes: 6.4 mm diameter..
Ex Tax: € 93.19
Rail adapters, for M5 screws, Length: 42.6 mm, Width: 10 mm, Height: 19 mm, Color: gray..
Ex Tax: € 0.25
Stamping bit, for bore holes: 8.4 mm diam..
Ex Tax: € 93.19
Pneumatic crimping pliers, for ferrules in accordance with DIN 46228-1: 1992-08 and DIN 46228-4: 199..
Ex Tax: € 542.16
Pneumatic crimping pliers, as table top version, for ferrules in accordance with DIN 46228-1: 1992-0..
Ex Tax: € 722.92
Control cabinet key, metal, for all common types of control cabinet..
Ex Tax: € 1.10
Pneumatic crimping pliers, for ferrules in accordance with DIN 46228-1: 1992-08 and DIN 46228-4: 199..
Ex Tax: € 667.28
Pneumatic crimping pliers, as table top version, for ferrules in accordance with DIN 46228-1: 1992-0..
Ex Tax: € 873.51
Stamping bit, for elongated hole: 6.5 x 15 mm..
Ex Tax: € 130.27
Stamping bit, for elongated hole: 5.5 x 12 mm..
Ex Tax: € 130.27
Stamping bit, for elongated holes: 4.5 x 12 mm..
Ex Tax: € 130.27
Stamping bit, for elongated hole: 4.5 x 12 mm..
Ex Tax: € 130.27
Stamping bit, for elongated hole: 3.5 x 12 mm..
Ex Tax: € 130.27
Stamping bit, for elongated holes: 3.5 x 12 mm..
Ex Tax: € 130.27
Crimping pliers, for crimping conductors to the module female contacts STG-MTN, crimp range: 0.5-2.5..
Ex Tax: € 679.69
Assortment box, metal, no components mounted..
Ex Tax: € 79.41
DIN rail, material: steel, perforated, height 5.5 mm, width 15 mm, length: 2 m..
Ex Tax: € 5.18
G-profile DIN rail, material: Steel, unperforated, height 15 mm, width 32 mm, length 2 m..
Ex Tax: € 13.85
DIN rail 35 mm (NS 35)..
Ex Tax: € 5.81
DIN rail 35 mm (NS 35)..
Ex Tax: € 5.71
DIN rail, material: steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m, without logo..
Ex Tax: € 7.95
DIN rail 35 mm (NS 35)..
Ex Tax: € 10.50
Accessories for CF 1000 stripping and crimping machine, feeder bowl for 0.50 - 1.5 mm² sleeves..
Ex Tax: € 938.01
Spare knife..
Ex Tax: € 21.12
Stripping tool for cables with PVC insulation, stripping range: 0.08 to 6 mm², wire cutting up to 6 ..
Ex Tax: € 74.68
Stripping tool, for conductors and cables of 0 to 11 mm diameter..
Ex Tax: € 31.04
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.4 x 2..
Ex Tax: € 3.84
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3..
Ex Tax: € 4.15
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.8 x 4..
Ex Tax: € 5.48
Stripping tool for cables with PVC insulation, stripping range: 0.08 to 6 mm², wire cutting up to 6 ..
Ex Tax: € 113.52
Replacement spring, for ZAP 25 and ZAP 100..
Ex Tax: € 3.32
Stamping bit, for bore holes: 7.0 mm diameter..
Ex Tax: € 93.19
Stamping bit, for bore holes: 3.8 mm diameter..
Ex Tax: € 93.19
Wire stopper, for the stripping pliers QUICK WIREFOX 6..
Ex Tax: € 1.04
Spare knife..
Ex Tax: € 36.95
Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip gr..
Ex Tax: € 5.06
Screwdriver, slot-headed, VDE insulated, size: 0.6 x 2.5 x 80 mm, 2-component grip, with non-slip gr..
Ex Tax: € 5.72
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, si..
Ex Tax: € 5.17
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip g..
Ex Tax: € 8.06
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.5 x 150 mm, 2-component grip, with non-slip g..
Ex Tax: € 10.99
Screwdriver, slot-headed, VDE insulated, size: 1.2 x 8.0 x 175 mm, 2-component grip, with non-slip g..
Ex Tax: € 16.52
Screwdriver, slot-headed, graded, for test socket screws, size: 0.6 x 3.5 x 100 mm, 2-component grip..
Ex Tax: € 6.48
Screwdriver, slot-headed, graded, for test socket screws, size: 0.9 x 6.5 x 175 mm, 2-component grip..
Ex Tax: € 11.51
Screwdriver, PH crosshead, VDE insulated, size: PH 0 x 80 mm, 2-component grip, with non-slip grip..
Ex Tax: € 5.99
Screwdriver, PH crosshead, VDE insulated, size: PH 1 x 80 mm, 2-component grip, with non-slip grip..
Ex Tax: € 7.58
Screwdriver, PH crosshead, VDE insulated, size: PH 2 x 100 mm, 2-component grip, with non-slip grip..
Ex Tax: € 10.46
Micro screwdriver, bladed, size: 0.4 x 2.0 x 60 mm, 2-component grip, with non-slip grip and twist c..
Ex Tax: € 4.79
Accessories for CF 1000 stripping and crimping machine, replacement blade for 0.25 - 2.5 mm², V-shap..
Ex Tax: € 157.04
Crimping pliers. with positioner, for turned connector contacts 0.08 mm² to 2.5 mm²..
Ex Tax: € 548.00
Automatic stripping and crimping device, for insulated taped ferrules 0.25 - 2.5 mm² according to DI..
Ex Tax: € 9,480.24
Automatic stripping and crimping device, 120 V version, for insulated taped ferrules 0.5 - 2.5 mm² i..
Ex Tax: € 9,688.61
Crimping pliers, for connector contacts 0.08 mm² - 0.56 mm²..
Ex Tax: € 464.74
Replacement knife for the automatic stripping and crimping device CF 3000-2,5..
Ex Tax: € 114.46
Replacement knife for the automatic stripping and crimping device CF 3000-2,5..
Ex Tax: € 114.46
Replacement knife for the automatic stripping and crimping device CF 3000-2,5..
Ex Tax: € 114.46
Replacement knife for the automatic stripping and crimping device CF 3000-2,5..
Ex Tax: € 114.46
Replacement knife for the automatic stripping and crimping device CF 3000-2,5..
Ex Tax: € 114.46
Sleeve receiver for 0.5 mm² sleeves..
Ex Tax: € 9.42
Sleeve receiver for 0.75 mm² sleeves..
Ex Tax: € 9.42
Sleeve receiver for 1.0 mm² sleeves..
Ex Tax: € 9.42
Sleeve receiver for 1.5 mm² sleeves..
Ex Tax: € 9.42
Sleeve receiver for 2.5 mm² sleeves..
Ex Tax: € 9.42
Replacement sleeve feed, for the crimping device CF 3000-2,5..
Ex Tax: € 204.20
Replacement sleeve feed, for the crimping device CF 3000-2,5..
Ex Tax: € 204.20
Replacement sleeve feed, for the crimping device CF 3000-2,5..
Ex Tax: € 182.36
Replacement sleeve feed, for the crimping device CF 3000-2,5..
Ex Tax: € 204.20
Replacement sleeve feed, for the crimping device CF 3000-2,5..
Ex Tax: € 204.20
Replacement fuse, for the crimping device CF 3000-2,5..
Ex Tax: € 7.06
Replacement fuse, for the crimping device CF 3000-2,5..
Ex Tax: € 7.06
Replacement processing insert 0.5 mm², for the crimping device CF 3000-2,5..
Ex Tax: € 303.92
Replacement processing insert 0.75 mm², for the crimping device CF 3000-2,5..
Ex Tax: € 303.92
Replacement processing insert 1.0 mm², for the crimping device CF 3000-2,5..
Ex Tax: € 303.92
Replacement processing insert 1.5 mm², for the crimping device CF 3000-2,5..
Ex Tax: € 303.92
Replacement processing insert 2.5 mm², for the crimping device CF 3000-2,5..
Ex Tax: € 303.92
Replacement fixing bolts, for the crimping device CF 3000-2,5..
Ex Tax: € 17.98
Replacement piston for the crimping pliers ZAP 25 and ZAP 100..
Ex Tax: € 29.00
Crimping pliers, for CK 4,0... contacts, for 4.0 - 6.0 mm² conductor cross sections..
Ex Tax: € 530.12
Replacement die for ZAP 25 and ZAP 25 T crimping pliers, with spring, pivot pin, finger guard, and h..
Ex Tax: € 180.18
Replacement die for ZAP 100 and ZAP 100 T crimping pliers, with spring, pivot pin, finger guard, and..
Ex Tax: € 180.18
One-hand bridge cutter, for fixed bridges FBI 10-6, FBI 10-8, FBI 10-10, FBI 10-12..
Ex Tax: € 28.71
Replacement hose..
Ex Tax: € 84.75
Case, unequipped..
Ex Tax: € 91.64
Profile cutter, for cutting and stamping holes in standard DIN rails, NS 32/NS 35/7,5/NS 35/15 and f..
Ex Tax: € 2,273.61
Handle for the lever rod of the profile cutter PPS.....
Ex Tax: € 19.61
Threaded pin M12 with nut, for the lever rod of the profile cutter PPS.....
Ex Tax: € 12.92
Stripping tool, for conductors and cables of 6.0 to 16.0 mm diameter..
Ex Tax: € 126.33
Profile cutter, for cutting and stamping holes in standard DIN rails, NS 32/NS 35/7,5/NS 35/15 and f..
Ex Tax: € 2,273.59
Profile cutter, for cutting to length and stamping holes in standard DIN rails, NS 32/NS 35/7,5/NS 3..
Ex Tax: € 4,091.47
Profile cutter, for cutting to length and stamping holes in standard DIN rails, NS 32/NS 35/7,5/NS 3..
Ex Tax: € 4,399.79
Workbench, without mounting screws, without bore holes, without DIN-rail cutter, 50 mm thick plywood..
Ex Tax: On Request
Profile plate, for the profile cutter PPS.....
Ex Tax: € 989.51
Accessories for DIN rail cutters..
Ex Tax: € 989.51
Stop carriage for measuring bar, complete for profile cutter PPS.....
Ex Tax: € 227.88
Stop for stop carriage, for the profile cutter PPS.....
Ex Tax: € 86.75
Lever rod for the profile cutter PPS.....
Ex Tax: € 73.88
Clamping lever for stop carriage of the PPS... profile cutter..
Ex Tax: € 23.84
Spring set for profile cutters PPS.....
Ex Tax: € 39.05
Measuring bar, version: Metric..
Ex Tax: € 284.35
Measuring bar, version: inches/metric..
Ex Tax: € 477.02
DIN rail 35 mm (NS 35)..
Ex Tax: € 8.82
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m..
Ex Tax: € 2.65
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m..
Ex Tax: € 2.47
Screwdriver, PZ crosshead, VDE insulated, size: PZ 0 x 80 mm, 2-component grip, with non-slip grip..
Ex Tax: € 6.12
Screwdriver, PZ crosshead, VDE insulated, size: PZ 1 x 80 mm, 2-component grip, with non-slip grip..
Ex Tax: € 7.69
Screwdriver, PZ crosshead, VDE insulated, size: PZ 2 x 100 mm, 2-component grip, with non-slip grip..
Ex Tax: € 10.40
DIN rail 35 mm (NS 35)..
Ex Tax: € 10.59
DIN rail end piece, for DIN rail NS 35/7.5..
Ex Tax: € 0.12
DIN rail end piece, for DIN rail NS 35/15..
Ex Tax: € 0.12
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m..
Ex Tax: € 4.12
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m..
Ex Tax: € 4.35
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 1.0 x 5..
Ex Tax: € 7.96
Basic crimping pliers, with short handles, without crimp inserts, with locator takeup..
Ex Tax: € 368.51
Service case, without crimping pliers, with 13 compartments for crimp inserts, L x W x H: 400 x 290 ..
Ex Tax: € 124.58
Crimp insert, for ferrules, 0.25, - 6.0 mm²..
Ex Tax: € 147.43
Crimp insert for tube lugs, 0.75 - 2.5 mm²..
Ex Tax: € 137.61
Crimp insert for tube lugs, 4.0 - 10.0 mm²..
Ex Tax: € 166.07
Automatic cutting device for cables, litz wires, and shrink sleeves, for 100 - 240 V mains voltage..
Ex Tax: € 4,625.71
Accessories for CF 1000-1,5 and CF 1000-10 stripping and crimping devices, feeder bowl for 2.5 mm² a..
Ex Tax: € 938.01
Accessories for CF 1000 stripping and crimping machine, feeder bowl for 0.25 - 0.34 mm² sleeves..
Ex Tax: € 938.01
Accessories for CF 1000 stripping and crimping machine, separating plate for 0.5 - 1.5 mm² sleeves..
Ex Tax: € 188.96
Accessories for CF 1000-1,5 stripping and crimping device, separating plate for AI...GB 0.5 - 1.5 mm..
Ex Tax: € 74.60
Accessories for CF 1000 stripping and crimping machine, separating plate for 2.5 mm² sleeves..
Ex Tax: € 52.67
Accessories for CF 1000 stripping and crimping machine, separating plate for 0.25 - 0.34 mm² sleeves..
Ex Tax: € 52.67
Accessories for CF 1000 and CF 1000-10 stripping and crimping machine, separating plate for 4.0 mm² ..
Ex Tax: € 52.67
Accessories for CF 1000 stripping and crimping machine, sleeve reversing block for 0.5 - 1.5 mm² sle..
Ex Tax: € 357.74
Accessories for CF 1000 and CF 1000-10 stripping and crimping machine, sleeve reversing block for 2...
Ex Tax: € 394.64
Accessories for CF 1000 stripping and crimping machine, sleeve reversing block for 0.25 - 0.34 mm² s..
Ex Tax: € 394.64
Accessories for CF 1000-1,5 stripping and crimping device up to serial number 160591, sleeve receive..
Ex Tax: € 226.68
Accessories for CF 1000-1,5 stripping and crimping device up to serial number 160591, sleeve receive..
Ex Tax: € 226.68
Accessories for CF 1000-1,5 stripping and crimping device up to serial number 160591, sleeve receive..
Ex Tax: € 210.45
Accessories for CF 1000-1,5 stripping and crimping device up to serial number 160591, sleeve receive..
Ex Tax: € 210.45
Accessories for CF 1000-1,5 stripping and crimping device up to serial number 160591, sleeve receive..
Ex Tax: € 210.45
Accessories for CF 1000-1,5 stripping and crimping device up to serial number 160591, sleeve receive..
Ex Tax: € 210.45
Accessories for CF 1000-1,5 stripping and crimping device up to serial number 160591 and CF 1000-10,..
Ex Tax: € 210.45
Accessories for CF 1000-1,5 stripping and crimping device, stranded wire guide for 0.5 mm² ... 1.5 m..
Ex Tax: € 262.67
Accessories for CF 1000 stripping and crimping machine, litz wire centering device for 2.5 mm²..
Ex Tax: € 163.10
Accessories for CF 1000-1,5 stripping and crimping device, stranded wire guide for 0.25 mm² ... 0.34..
Ex Tax: € 163.10
Accessories for CF 1000 and CF 1000-10 stripping and crimping machine, litz wire centering device fo..
Ex Tax: € 163.10
Accessories for crimping machine..
Ex Tax: € 142.63
Accessories for CF 1000-1,5 stripping and crimping device up to serial number 160591, pressing clamp..
Ex Tax: € 473.57
Accessories for CF 1000-1,5 stripping and crimping device up to serial number 160591, pressing clamp..
Ex Tax: € 381.02
Accessories for CF 1000-1,5 stripping and crimping device up to serial number 160591, pressing clamp..
Ex Tax: € 473.57
Accessories for CF 1000 stripping and crimping machine, mains fuse, 20 x 5 mm, slow-blow, 2 amps, up..
Ex Tax: € 10.63
DIN rail, according to customer specifications, material: Galvanized steel, unperforated, height: 5,..
Ex Tax: € 11.17
2 replacement rolls for CUTFOX 10..
Ex Tax: € 42.17
Replacement knife, for the CUTFOX 10 cutting machine..
Ex Tax: € 96.72
Комплектующие Ð´Ð»Ñ ÑƒÑтройÑтва автообжима..
Ex Tax: € 17.32
Accessories for crimping machine..
Ex Tax: € 10.85
Accessories for crimping machine..
Ex Tax: € 10.85
Stripping pliers, for standard insulation such as PVC and PE, stripping range: 4 to 16 mm², can cut ..
Ex Tax: € 84.97
Spare knife, for QUICK WIREFOX 18..
Ex Tax: € 87.95
Screwdriver, slot-headed, VDE insulated, size: 0.5 x 3.0 x 100 mm, 2-component grip, with non-slip g..
Ex Tax: € 5.90
Die for the CRIMPFOX LC basic crimping pliers to crimp the VARIOSUB RJ45 male insert VS-08-ST-RJ45..
Ex Tax: € 326.23
Showing 601 to 800 of 99716 (499 Pages)